Tap water valve fi12 john guest

Tap water valve Fi12 John Guest

Water tap valve with quick connector John Guest quick-connect valves for water installations are intended for water installations in caravans, Kamper and KamperVan cars, and all models of boats and yachts. Cock valves mounted with quick connectors allow for quick installation using the JG click system. This allows for a tight and durable connection of the installation. The construction and expansion of a water installation in a caravan, camper, campervan, boat or yacht can be quickly done thanks to the use of John Guest water installation fittings and quick connectors.

Water fittings and hoses should be kept clean and undamaged before use. All pipe, water hose and fitting installations must be pressure tested after installation to ensure system integrity before being handed over to the end user.

In order to protect the installation against leakage, we recommend using safety rings.

Push-fit technology

Quick disconnection without the need for tools

Easy change or expansion of the system

No corrosion

Reduced maintenance and installation time

for a hose with a diameter of 12 mm

Endurance ,

Maximum temperature +70°C

+20°C - 10 Bar

+65°C - 7 Bar

IMPORTANT USE INSTRUCTIONS,

JG tap valves are designed to enable temporary service of disconnected components or installation subassemblies. They can only be used in the "completely open" or "fully closed" position.

Tap valves cannot be used:

as flow regulators (only partially open)

as a long-term pipe plug (we recommend using pipe plugs)

only one-sided connected

as a drain tap