Vibro-isolator engine mount 40x40 m8 abc

HIGH QUALITY POLISH PRODUCT, NO!!! 'MADE IN CHINA'

PRICE/QUALITY RATIO = very good

COMPANY WITH MANY YEARS OF TRADITION

CONTINUATION OF A FAMILY BUSINESS FOUNDED IN 1986

MANUFACTURER OF RUBBER PRODUCTS COMPANY 'MARGO' OFFERS: AUCTION CONCERNING: RUBBER SHOCK ABSORBER 40 X 40 mm, available versions: version A - with screws on both sides M8 x 27 mm

or

version B - M8 x 27mm screw on one side, M8

nut on the other side or

version C - nut on both sides

note: when purchasing, please provide the version !!!

Vibration isolators made of rubber resistant to weather conditions, greases, oils, temperatures up to 120 degrees Celsius, with a high vibration damping coefficient and hardness of 65ShA.

SHOCK ABSORBERS CAN BE USED TO DAMPEN VIBRATIONS IN INDUSTRIAL EQUIPMENT, E.G.:

COMPRESSORS, FANS, TABLE GRINDERS, SAWS, LATHES, MILLING MACHINES, ETC.,

AND ALSO IN CONSTRUCTION MACHINES E.G.: ROLLERS, COMPACTORS, ETC.

Tensile strength: - rupture of the rubber-metal connection >,= 560 kg, rupture of rubber >,>, 560 kg.

ATTENTION!!!

PRODUCT 100% OWN POLISH PRODUCTION HIGH QUALITY RUBBER, thanks to the use of a mixture whose base consists of three specially selected rubbers (competitors' products are a mixture based on natural rubber, which is not resistant to oils and greases and has poor mechanical parameters)

WELDED JOINT OF METAL ELEMENTS (competitors screw the screw into a thin sheet of metal, which causes the connection to quickly loosen, increases sensitivity to vibrations and leads to damage to the vibro-isolator)

3.0 mm THICK SHEET SHEET (competitors use thin 1.5 to 2 mm sheet metal, which causes the sheet metal to break and detach from the rubber faster)

COMBINED RUBBER-METAL WITH INCREASED MECHANICAL AND DYNAMIC RESISTANCE, double layer of glue, increased adhesion to metal thanks to a specially prepared surface and the use of a special primer.

WE ALSO OFFER OTHER DIMENSIONS NOT INCLUDED IN THE TABLE THANKS TO CONSTANTLY EXPANDING OUR PRODUCT OFFER.