Vibration isolator engine mount 40x40 m8 b

HIGH QUALITY POLISH PRODUCT, NO!!! 'MADE IN CHINA'

PRICE/QUALITY RATIO = very good

MANUFACTURER OF RUBBER PRODUCTS COMPANY 'MARGO' OFFERS: RUBBER SHOCK ABSORBER 40 x 40 mm - version B - on one side an M8 X 25 mm screw, on the other side an M8 nut, vibration isolators made of rubber resistant to weather conditions, greases, oils, temperatures up to 120 degrees Celsius, with a high vibration damping coefficient and hardness of 65ShA.

SHOCK ABSORBERS CAN BE USED TO DAMPEN VIBRATIONS IN INDUSTRIAL EQUIPMENT, E.G.:

COMPRESSORS, FANS, TABLE GRINDERS, SAWS, LATHES, MILLING MACHINES, ETC.,

AND ALSO IN CONSTRUCTION MACHINES E.G.: ROLLERS, COMPACTORS, ETC.

Tensile strength: - rupture of the rubber-metal connection >,= 560 kg, rupture of rubber >,>, 560 kg.

ATTENTION!!!

PRODUCT 100% OWN POLISH PRODUCTION HIGH QUALITY RUBBER, thanks to the use of a mixture whose base consists of three specially selected rubbers (competitors' products are a mixture based on natural rubber, which is not resistant to oils and greases and has poor mechanical parameters)

WELDED JOINT OF METAL ELEMENTS (competitors screw the screw into a thin sheet of metal, which causes the connection to quickly loosen, increases sensitivity to vibrations and leads to damage to the vibro-isolator)

3.0 mm THICK SHEET SHEET (competitors use thin 1.5 to 2 mm sheet metal, which causes the sheet metal to break and detach from the rubber faster)

COMBINED RUBBER-METAL WITH INCREASED MECHANICAL AND DYNAMIC RESISTANCE, double layer of glue, increased adhesion to metal thanks to a specially prepared surface and the use of a special primer.

WE ALSO OFFER OTHER DIMENSIONS NOT INCLUDED IN THE TABLE THANKS TO CONSTANTLY EXPANDING OUR PRODUCT OFFER.