1 pcs : TUSB216RWBT - USB Interface IC USB 2.0 high speed signal conditioner with DCP and CDP controllers 12-X2QFN 0 to 70

TUSB216 USB 2.0 High-Speed Signal Conditioner Texas Instruments TUSB216 USB 2.0 High-Speed Signal Conditioner is a third-generation conditioner designed to compensate both AC loss (due to capacitive load) and DC loss (due to resistive loss) in the transmission channel. The TUSB216 leverages a patented design to speed-up transition edges of USB 2.0 high-speed signals with an edge booster and increases static levels with a DC boost function. Also, the TUSB216 includes a pre-equalization function to improve the receiver sensitivity and compensate the inter-symbol interference (ISI) jitter in application with longer cable length. USB low-speed and full-speed signal characteristics are unaffected by the TUSB216. The TUSB216 improves signal quality without altering packet timing or adding propagation delay or latency. The device helps a system to pass the USB 2.0 high-speed near end eye compliance with a cable as long as 5 meters. The TUSB216 is compatible with the USB On-The-Go (OTG) and battery charging (BC 1.2) protocols. The Integrated BC 1.2 battery charging controller can be enabled via a control pin.