Stickers forklift inscription Toyota with logo 50 cm

STICKERS: TOYOTA with logo Dimensions: up to 50 cm

Price includes: 2 pcs. (for the right and left side)

Stickers are cut from self-adhesive foil from renowned manufacturers (resistant to weather conditions - frost, sun, mud, rain)

Stickers are cut using plotter (cutting along the outline) according to the individual customer order (pattern, size, color, etc.)

Stickers can be covered with a clear, non-solvent varnish

All stickers have a transport foil so they are easy to stick

The sticker is the black part of the graphic, any the white spaces in the graphics below are the background, i.e. the surface on which we stick the graphics, after sticking, only the elements cut from the foil will remain, without the background

After purchase, you must provide:

Size of stickers (up to 50 cm)

Color of stickers

If you do not provide the color pattern after purchase or size, you will receive the pattern and color from the thumbnail of the maximum size from the auction

TOYOTA inscription on FORKLIFT with logo The actual colors may differ slightly from the colors in the photo

APPLICATION INSTRUCTIONS:

Clean and degrease (e.g. extraction naphtha) the surface on which the sticker will be glued.

Press the sticker to the transport foil with a squeegee, making several sliding movements back and forth.

Gently peel off the backing paper from the transport foil with the sticker. Do it from as wide an angle as possible. If the sticker does not come off the paper, press it against the transfer foil again and try again. To avoid air bubbles, stick the sticker starting from one side. Be careful not to stick the entire sticker at once. Then gradually press the transfer foil with a squeegee until it reaches the other side of the sticker. Press the entire sticker again with a squeegee. Peel off the transport foil slowly and carefully at a large angle. Make sure that all elements are glued well and that the transport foil does not come off. If this happens, stick this part back on and press firmly.

Recommended gluing temperature above +10 °C. The adhesive achieves 100% adhesion 24 hours after application. Do not wash the surface for 48 hours after applying the sticker.