Tarpaulin summer repair kit 220x10cm green

The price does NOT include cleaning wipes, a knife or a primer. To purchase them, select the set you are interested in in the Allegro options.

APPLICATION: cuts in the tarpaulin, damage on the edges TOPPA - a set for quick, easy and permanent repair of tarpaulins. TOPPA self-adhesive patches are highly resistant to weather conditions. A damaged (cut or abraded) tarpaulin is quickly and easily repaired by the driver himself. There is no need to go to a specialist repair facility, because TOPPA is a durable and long-lasting solution. TOPPA also means financial security related to securing the cargo.

TOPPA ROTOLO MINI SET - - is a tarpaulin material 220 cm long and 10 cm wide, covered on one side with high-quality, very durable glue and secured with foil. It is used like an adhesive plaster on a torn tarp. The adhesive is resistant to weather conditions.

INSTRUCTION MANUAL

In a room at room temperature (e.g. a car cabin), remove TOPPA from the packaging.

Thoroughly wash and dry the area around the torn tarpaulin.

Rub the area intended for TOPPA application with the sandpaper included in the kit.

Wash any dirt remaining after using sandpaper thoroughly with a blue cleaning cloth and wait until it dries.

After the surface dries, apply the gray wipe "Priming preparation", preferably from top to bottom in one smooth movement. An invisible primer coat remains on the surface, which increases the bonding of difficult surfaces.

Apply TOPPA and press it to the surface on which it is applied.

Wait two minutes. Done!

NOTE: Do not bend the product. After removing the protective foil, immediately stick the patch on the tarpaulin. Correct surface preparation is extremely important for durability. Remember that each adhesive reaches its full chemical properties within 24 hours, so it is not recommended to glue on tarpaulins exposed to direct sunlight on hot days - patch holes in the afternoon, and in the morning even the highest temperature will not be dangerous.

The following accessories are NOT are included in the set sold, this is an additional option, select the set you are interested in in the Allegro options. CLEANING AND DEGRATING WIPES Soaked in 77% isopropyl alcohol Perfect for preparing the surface before gluing

An excellent accessory that allows you to seal holes even in places where heat welding heat wouldn't be able to cope, there is a preparation for priming our glue. Just wipe the dry surface with a special wipe, preferably from top to bottom in one gentle movement. An invisible primer coating remains on the surface, which increases the bonding of difficult surfaces.

VERY SHARP KNIFE FOR PAPER, WALLPAPER, CARDBOARD, RUBBER, FOIL, PVC, etc. A knife commonly used in packaging, construction, in the office, workshop

The product may differ from the presented one in the photo (shape, color)