Repair kit for flying tires, ATV 110 string

Name: Copy String tire repair kit

Symbol: 13-0843

Weight 1 pc (kg): 0

Description and technical data:

The tire repair kit allows you to repair a leaky tire in the field without the need to visit a tire repairer.

Perfect for off-road and road conditions. Easy application

How to use:

1. Insert the reamer into the hole according to the piercing angle and move it up and down several times to clean the inside of the hole.

2. Squeeze the glue from the tube onto the reamer and move it up and down in the hole several times until the place for inserting the butyl rope is completely saturated with glue.

3. Thread the butyl rope halfway through the eye of the awl and apply glue to it.

4. With a decisive movement, push the awl into the puncture hole so that the rope goes through all layers of the tire . Remember to leave the rope protruding about 1 cm above the tread. Then slowly pull the awl out of the tire, leaving the rope in place of the hole. ATTENTION! Do not rotate the awl inside the tire while pulling it out - it may break it.

5.Cut off the excess rope flush with the tire. Before inflating the tire, wait 15 minutes for the glue to set. After inflating, check for leaks.