Straight hydraulic connector 3 8 1 2

STRAIGHT HYDRAULIC CONNECTOR G3/8' - G1/2' SKRAW-MET CODE: [0209] Application: The hydraulic connector is perfect for hydraulically powered machines and devices.

It can be used in agriculture, horticulture, forestry and construction.

The connector is designed to be screwed into the body of, among others: a pump, a distributor, etc.

It is used to connect the main components in the hydraulic system with hydraulic lines.

The connector is responsible for connecting a hydraulic line or an elbow. Sealing occurs after tightening the joints on the self-sealing cone. This ensures complete sealing of the system. The connector is designed to be screwed into the body. It should not be used to connect two hydraulic lines. For this purpose, connectors available at other auctions are used.

Technical data: Clamping cone angle: 24° (typical for the Polish standard)

Nominal diameter of the passage: 12 mm

G1 thread on the cable side: external inch 3/8'

G2 thread on the cable side : external inch 1/2'

Connection version: light

Nominal pressure: 180 bar

Maximum pressure: 230 bar

Liquid type: hydraulic oil

Material: weldable, galvanized steel, corrosion-resistant