Red and white warning stripes stickers 8x60cm

STICKERS: LAMINATED WARNING BELTS, WHITE AND RED!!! Dimensions of 1 piece: 8 x 60 cm

The price is for: 2 pieces (right and left)

The stickers are printed (resistant to weather conditions - frost, sun, mud, rain),

Additionally, the stickers are covered with laminate, which doubles their durability and resistance, so they do not lose their colors.

REFLECTIVE STICKERS are those that reflect light!!! They do not glow on their own.

LAMINATED REFLECTIVE WARNING BELTS stickers!!!The actual colors may differ slightly from the colors in the photo

APPLICATION INSTRUCTIONS:

Clean and degrease (e.g. with benzine) the surface on which the sticker will be stuck.

Press on squeegee the sticker onto the transport foil, making several sliding movements back and forth.

Gently peel off the backing paper from the transport foil with the sticker. Do it from as wide an angle as possible. If the sticker does not come off the paper, press it against the transfer foil again and try again.

To avoid air bubbles, stick the sticker starting from one side. Be careful not to stick the entire sticker at once. Then gradually press the transfer foil with a squeegee until it reaches the other side of the sticker. Press the entire sticker again with a squeegee.

Remove the transport foil slowly and carefully at a large angle. Make sure that all elements are glued well and that the transport foil does not come off. If this happens, stick this part back on and press firmly.

Recommended gluing temperature above +10 °C. The adhesive achieves 100% adhesion 24 hours after application. Do not wash the surface for 48 hours after applying the sticker