Stainless steel exhaust elbow fi 76 1mm 15

Stainless steel elbow fi 76.1mm 15°

The elbow is made of AISI 304 stainless steel, bending radius CLR 152 mm, made on a mandrel bending machine, from a straight section of pipe with a seam with a diameter of 76.1 mm, length 420 mm, wall thickness 1.6 mm. Elbows can be used to build exhaust systems, standard bending angles are every 15 degrees. On request, we can make any bending angles for particular diameters. Illustrative photos, length tolerances (+ -) 2 mm.

Material: stainless steel (304 AISI)

Angle: 15°

Wall thickness: 1.6 mm Bending radius: 152 mm

Most of the work we perform requires the use of pipes, both stainless steel and aluminum, or chrome-molybdenum steel. A mandrel bender is necessary to bend the pipe, especially in the hard 316 grade to a small radius of 1.5 D. We are equipped with a bending machine that allows bending a pipe with a maximum diameter of 90 mm. A big advantage is the ability to bend thin-walled pipes with a wall of 1.2

We are a small, Polish, family company. We sell products that we made ourselves. The quality of our products is definitely higher than commonly available products produced in the East outside Europe.