LiFePO4 battery 12V 100Ah 150A 1280Wh + BT + Heating MatLithium batteries from the LP Pro series were designed for solutions that require high power and long-term reliability. They provide excellent operating parameters and high efficiency. They are an ideal solution for installations collecting all types of renewable energy, both solar and wind. They are used in industry and transport. They are also suitable for non-commercial and recreational applications.
Thanks to the built-in heating mat, they can operate at negative temperatures.
The factory-installed Bluetooth module allows you to constantly monitor their operating parameters, and the efficient BMS allows you to power devices with a power of 1.8 kW.
The system The BMS ensures monitoring of cell voltage and temperature both during charging and discharging of cells. If critical values are exceeded, the system cuts off the power, thus ensuring the safety of the battery and the working environment.
Charging at negative temperatures is carried out thanks to the built-in heating mat.
The actual charging process begins when the cell temperature reaches a positive value and is within the range between 0°C and 45°C
Typical use of LiFePO4 batteries
Electric vehicles: campers, scooters, quads
Electric boats
Gardening equipment
Photovoltaic installations
UPS emergency power supply
Printers, cash registers, alarms
BATTERY TECHNICAL PARAMETERS
Cell type: LiFePO4
Nominal voltage: 12.8 VDC
Nominal capacity: 100 Ah
Nominal capacity: 1280 Wh
Operating voltage: 10.8 - 14.6 VDC
Charging voltage: 14 .6VDC
Maximum charging voltage: 14.6VDC
Recommended discharge voltage: 11.2VDC
Critical discharge voltage: 10.8VDC
Recommended charging current: 25A
Maximum charging current: 100A
Maximum continuous discharge current: 150A
Maximum discharge current: 180A
Internal resistance: <, 25m Ohm
Efficiency: >, 99.5%
Self-discharge (month): <, 3%
Built-in BMS: YES
Bluetooth communication: YES
Lifespan (0.2C, 25°C 100% DOD): 4000 cycles
Lifespan (0.2C, 25°C 80% DOD): 6500 cycles
Battery series connection: Yes, maximum 4 pieces
Heating function: YES
Discharge temperature: -20 Celsius C ÷ 60 St. C
Charging temperature: -20 degrees Celsius C ÷ 45 St. C
Storage temperature: -10 degrees Celsius C ÷ 30 St. C
Dimensions: 330 x 171 x 215 mm
Weight: 10.2 kg
Connector: M8
Housing material: ABS
BMS TECHNICAL PARAMETERS
I overcharge protection: 160A (delay 1000 ms)
Overcharge protection II : 180A (delay 500 ms)
I discharge protection: 180A (delay 5 sec.)
II discharge protection: 250A (delay 3 sec.)
Overvoltage protection: 15.0 VDC (delay 500 ms)
Undervoltage protection: 8.8 VDC (delay 500 ms)
Thermal protection on: above 95 degrees Celsius
Thermal protection off: below 85 degrees Celsius
Battery test on YOUTUBE:
https://youtu. be/h_ZG_ADZzu0