Solar inverter sinus pro 5000 s 48 230v 3400 5000w 60a mppt 100v

Solar inverter converter SINUS PRO 48/230V 3500/5000W MPPT 60A VOLT POLSKA SinusPRO emergency power supply used to power electrical devices requiring 230V alternating voltage from 48V direct voltage batteries. The built-in solar regulator allows you to additionally use solar energy to charge the batteries and power the connected load.

The following functions are included in one device:

PURE SINUS DC/AC converters based on a toroidal transformer

UPS emergency power supply

Mains charger for charging batteries

MPPT solar controller

AVR

automatic mains voltage stabilizer The product produces a pure sinusoidal output signal, identical to that in the power grid. Thanks to this solution, the converter is compatible with, among others: with: refrigerators, TVs, lamps, computers and many other devices. The most important features: Continuous power: 3500W

Instantaneous power: 5000W

Battery voltage: 48V

Output voltage: 230V / 50Hz

Solar controller: 60A MPPT

Voltage waveform: pure sine (very high operational stability)

Possibility to connect solar panels (operation in the Off-Grid system)

Ability to select work priority (AC / PV / BAT)

Equipped with two 230V sockets, LCD display and wiring Characteristics: The built-in toroidal transformer compensates for different reactive power of receivers (capacitive, inductive and resistive loads can be combined), and responds very flexibly to overloads, e.g. starting pumps, compressors, engines. It ensures high efficiency and low no-load current and is energy-saving The converter can operate in UPS mode, which ensures virtually uninterrupted operation of connected devices, e.g. blowers, feeders, pumps, central heating installations, automation, etc.

A fast 32-bit microprocessor ensures accurate and failure-free operation

Intuitive and simple operation thanks to a color LCD display that provides information about the current operating status of the device (input and output voltage, battery status, charging, etc.)

The inverter produces a pure sinusoidal voltage at the output, which allows operation with virtually any type of load

High battery charging current

Wide input frequency range, 50/60Hz automatic detection Intelligent control of the cooling fan, depending on the actual temperature of the device and the operating status of the inverter

AC (mains) / BAT (battery) / PV (solar) operation priority switch

Built-in high-quality MPPT

solar controller Full range of protections and alarms: overload, short circuit, over- and under-voltage protection, temperature protection

Wide application The product can be used to protect and power devices such as:

Solar panels, photovoltaics

Office equipment (computers, monitors, printers, scanners)

Power supply for chargers (phones, smartphones, laptops, etc.)

RTV devices (TVs, tuners, speakers, projectors)

Household appliances (refrigerators, microwaves, dishwashers, stoves, freezers)

Power tools (drills, saws, grinders, machine tools, etc.)

Pumps, compressors (water, heat, air conditioners)

Safety of use A number of safeguards are responsible for the safe operation of the product, protecting both the connected devices and the inverter itself:

Short-circuit protection

Thermal protection

Undervoltage protection

Overvoltage protection

Overload protection

Operating modes: PV >, AC >, BAT - priority of operation from the connected set of solar panels + emergency power supply. When the energy from the panels is too low, the inverter switches to grid operation and charges the batteries. If in such a situation there is a loss of mains voltage, the power supply will switch to the mode of operation from the connected batteries. When the mains voltage returns, it will switch back to mains mode and start charging the batteries. When voltage appears on the panels, the cycle will repeat from the beginning.

AC >, PV >, BAT - priority for operation from the AC network. When there is a loss of mains voltage (or the value exceeds the permissible range), the inverter switches to operation from the set of photovoltaic panels. If in such a situation there is a loss of voltage from the solar panel set, the power supply will switch to the mode of operation from the connected batteries.

PV >, BAT >, AC - priority of operation from the connected set of solar panels + battery mode. When there is a loss of voltage from the solar panel set, the inverter switches to operation from the connected batteries. If in such a situation the battery voltage drops below 50% discharge, the power supply will switch to mains operation without charging the battery from the mains. After the voltage returns from the connected panels, the cycle will repeat from the beginning.

SINUS PRO version The feature that distinguishes sine converters from classic simple AC/DC converters is the generation of a sinusoidal alternating voltage at the output, identical to that in the power grid. This allows you to power devices equipped with electric motors and transformers, such as power tools, pumps and low-power household appliances.

Simple, cheap converters actually produce a square-wave voltage, sometimes incorrectly called a 'modified sine wave'. Such voltage is not suitable for powering inductive or capacitive devices and may damage them.

Technical parameters: Total power (instantaneous): 5000 W

Rated power (continuous): 3500 W

Battery voltage: 48V

Operating modes: PV>,BAT>,AC / AC>,PV>,BAT / PV>,AC>,BAT

Display: color LCD + signaling diodes

Photovoltaic panel:

Input voltage range: 48-100 VDC

Max charging current: 60A MPPT

Maximum efficiency: 98%

Mains power:

Input voltage range: 140-275 VAC

AVR voltage stabilizer: 140-275 VAC

Frequency: 45-65 Hz

Output voltage range: 190-245 VAC

Input power factor: 0.98

Maximum efficiency: >, 96%

Charging current from the mains: 10A

Overload: warning until the load is reduced

Short-circuit protection: yes

Output parameters of the converter:

Output voltage range: 230V +-3%

Frequency: 50Hz +- 0.3Hz

Output power factor: ≥ 0.8

Distortion: >.3% under linear load

PV-AC switching time: typically 4ms, maximum 6ms

Maximum efficiency: >, 80%

Overload: 110%-150% turns off after 30s, 150%-250% turns off after 15s

Short circuit: automatic shutdown

Other:

Ambient temperature: 0 ⁰C - 40 ⁰C

Relative humidity: 10-90% (non-condensing)

Noise level: ≤ 50dB

Dimensions: 540x330x130mm

Weight: 25 kg

Manufacturer's code: 3SPS500048

Manufacturer - VOLT POLSKA Volt Polska is a well-known and reliable brand on the emergency power market in Poland and Europe. The company distributes and produces, among others: uninterruptible power supplies, DC/DC converters, DC/AC converters, voltage converters and reducers, laptop power supplies, rectifiers and batteries.

Thanks to a well-thought-out and dynamic operating strategy, within a few years Volt Polska has gained a well-deserved reputation on the market. With every step, they work to ensure that their products are best suited to the current needs of customers, additionally supported by the manufacturer's professional service.