Protective foil protects against scratches

Professional German protective foil from Oracal. The price is for the size 126 x 10 cm, when you buy 2 pieces you get 126 x 20 cm, 3 pieces 126 x 30 cm, etc.

PVC self-adhesive polymer foil, 150 µm thick, with a glossy surface and a UV filter. Used to protect sensitive surfaces against mechanical damage. It can be used for internal and external applications. The foil was prepared as a special protection for vehicle body elements particularly exposed to stone impacts. Recommended for use on flat and slightly embossed surfaces.

COVERING MATERIAL: Special, one-sided silicone-coated paper, 137 g/m2

ADHESIVE: Solvent-based polyacrylate, permanent, positionable, colorless.

ATTENTION! When ordering via parcel locker and collecting at the point, the foil will be cut into single sheets max 126x60cm.

TECHNICAL DATA:

Thickness* (without protective paper and adhesive layer): 150 µm

Shape stability: (FINAT TM 14) glued to steel - maximum 0, 3 mm

Seawater resistance: (DIN 50021) glued to aluminum after 100 hours/23ºC. shows no change.

Temperature resistance: glued to aluminum -40 oC to + 110 ºC

Resistance to solvents and chemicals: At room temperature, 72 hours. when applied to aluminum, the foil is resistant to most oils and fats, fuels, aliphatic solvents, weak acids and alkali compounds.

Reaction to fire (DIN 75200) Applied to steel - self-extinguishing

Adhesive strength (FINAT TM 1, after 24 hours, steel stainless steel): min. 25 N/25 mm

Tear resistance (DIN EN ISO 527) Longitudinal: min. 22MPa Transverse: min. 25MPa

Tensile resistance (DIN EN ISO 527) Longitudinal: min. 150% Lateral: min. 180%

Shelf life

With vertical exposure in Central European climate conditions (if properly applied by a specialist) 5 years

Recommended application temperature +gt, +10ºC

Storage period** 2 years

* - average value

** - in the original packaging, at a temperature of 20ºC and a relative air humidity of 50%.

Note:

The surface on which the foil is applied must be cleaned of dust, grease and other contaminants that could adversely affect the adhesion of the product. Freshly lacquered or painted surfaces should be left to dry for a minimum of 3 weeks, and in the case of car paints, up to 3 months.

The possibilities of using selected varnishes or paints with self-adhesive foil should be checked before the final application of the foil.

Before applying the foil, check whether any chemical reactions occur between the foil and the substrate. In addition, any information regarding the application of the foil published by Orafol Europe GmbH should be taken into account.