Multibond 26 bonding rubber to metal 100ml

Multibond 26 (100g) ADHESIVE FOR BONDING RUBBER TO METAL - MB260100

solvent adhesive based on polychloroprene rubber in a solution of organic solvents with the addition of synthetic resins and fillers, intended for the aviation and automotive industries for bonding rubber to metals. It can be used together with the MULTIBOND-22u hardener.

Chemical type: polychloroprene rubber

Form: liquid

Color: beige

Solvent: extraction naphtha

Viscosity (Ford cup, fi 6mm, flow 100cm3): 150-270s

Density: 0.83 g/ml

Solids content: 36-40%

Curing: by evaporation of the solvent

Application time (+23C): 17-20min

Full strength: >.36h

Wear time mixtures (100:5): 8h

HARDENED PRODUCT:

Form: flexible rubber

Resistance to delamination (leather-rubber): 2daN/cm, to peeling: 11daN/mm2

Thermal resistance: -20 +80(100) )C

SCOPE OF APPLICATION:

bonding of rubber linings and linings,

and gaskets for steel and aluminum,

consumption (with double-sided application, depending on the quality of the glued surface and the method of application): 200-300g/m2

Tip:

The bonding strength of the adhesive depends on the type of prepared surface. The surface should be dry, free from grease, dust, oil and other materials with anti-adhesive properties.

We recommend that before gluing, make a test, preferably on a sample material or in invisible places, so as not to damage the actual material.

Please remember that seemingly the same materials, e.g. colloquially 'rubber', are often completely different products, which is why the glue may react differently to them