Mb 1103 two-component epoxy glue 60c 100c

MULTIBOND-1103 ('HOBBY' syringe 24ml) - epoxy gel glue 1:1, without a mixer, two-component epoxy glue with a gel consistency, mixed 1:1 (by volume), with a very average setting time

creates thick, hard-elastic joints, does not run off . Connects glass, metals, stone, ceramics, hard materials, wood, concrete. Chemical type: epoxy resin (A) hardener (B)

Form: thickened

Color: yellowish, transparent

Viscosity: gel

Density: 1 .2g/ml(A)/1.10g/ml(B)

Solvent content: none

Polymerization method: mixing 1:1

Time to use (+23C): 20min

Setting time (+23C) : 2h

Full mechanical strength: 24h

Full chemical strength: 14 days

HARDENED PRODUCT:

Appearance: hard-elastic polymer material

Thermal resistance: -60 +100C

Shear strength:

on metal: 28 N/mm2 per form. <.8 N/mm2

resistance to peeling: 5.5N/mm

SCOPE OF APPLICATION:

creating joints in bonding glass with metals, ceramics and plastics,

other joints on metals and other rigid materials with high shear strength and impact resistance,

creating joints on vertical surfaces (less susceptibility to flow).

MULTIBOND's offer includes conventional packaging: small 24 ml 1:1 'HOBBY' syringes without a mixer, DUO-MIX 50 ml cartridges with a mixer for a two-component gun, and sets of glue containers with larger volumes (500g).

Tip:

The bonding strength of the adhesive depends on the type of prepared surface. The surface should be dry, free from grease, dust, oil and other materials with anti-adhesive properties.

We recommend that you test it before gluing, preferably on a sample material or in invisible places so as not to damage the actual material.

It must be remembered that seemingly the same materials, e.g. 'rubber', are often completely different products, which is why the glue may react differently to them

All photos are for preview purposes only