Hydro distributor, monoblock, 6 sections, 80l connections

6-SECTION HYDRAULIC DIVIDER 80L WITH CONNECTIONS (NIPPLES) SKRAW-MET CODE: [8239] Manufacturer: SM-G (SKRAW MET GROUP) Includes: 6-Section Hydraulic Manifold 80L [2010]

12x BSP connection: 1/2' - M22x1.5 [1388]

2x BSP connection: 3/4'- M22x1.5 [1392]

The high-quality, monoblock distributor is characterized by a compact design, stable operation and high versatility.

It allows you to control one double-acting actuator or (after plugging one of the ports) single-acting.

It is possible to connect in series to an existing system (pressure sleeve required).

Application: The distributor is perfect for hydraulically powered machines and devices.

It can be used in agriculture, horticulture, forestry and construction.

Diverter universal, can be used in various types of machines such as: Cyclops

Tours

Loaders

Plows

Forklifts and many others

Three-position lever (1 - 0 - 2) on a spring returns to the vertical by itself

Neutral position 0 (lever set vertically) the actuator piston rod is standing - the oil goes to the overflow.

Working position 1 (lever set in an oblique forward position), the actuator piston rod extends.

Working position 2 (lever set in a backward diagonal position), the actuator piston rod retracts.

Connection: Power supply ( P) BSP 3/4''

Return (T) BSP 3/4''

BSP 1/2'' section outlet

BSP 3/4'' connection

Technical specifications: Oil flow: 0 - 80 l/min .

Permissible ambient temperature: -40℃ to +60℃

Permissible oil temperature: -15℃ to +80℃

Maximum working pressure: 300 Bar

Hydraulic oil based on mineral oil

The diagram in the photo opposite corresponds to one section of the distributor.

Straight hydraulic connections - Nipples Manufacturer: SM-G (SKRAW MET GROUP) They are used to connect the main components in the hydraulic system with hydraulic lines.

On the connection side there is an ED seal that fully seals the system.

The other side is responsible for connecting the hydraulic line or elbows. Sealing occurs after tightening the joints on the self-sealing cone. This ensures complete sealing of the system.

The connections are designed to be screwed into the body. They should not be used to connect two hydraulic lines. For this purpose, connectors available at other auctions are used.

Application: Hydraulic connections are perfect for hydraulically powered machines and devices.

They can be used in agriculture, horticulture, forestry or construction.

The connections are designed to be screwed into the body, including: pump, distributor, actuator, etc.

Technical specification of nipples: Straight hydraulic connection - nipple M22x1.5 - G3/4' Total length: 38 mm

Nominal diameter of the passage: 10 mm

G1 thread on the body side: external inch 3/4'

M2 thread on the cable side: external metric M22x1.5

Straight hydraulic connection - nipple M22x1.5 - G1/2' Total length: 35 mm

Nominal diameter of the passage: 11.5 mm

G1 thread on the body side: external inch 1 /2'

M2 thread on the cable side: external metric M22x1.5

Angle of clamping cones: 24° (typical for the Polish standard)

Nominal pressure: 180 bar

Maximum pressure: 230 bar

Liquid type: hydraulic oil

Connection version: light

Material: weldable steel, galvanized, corrosion-resistant