Work lamp 5xled 630 lm 12w connection

WORK LAMP 5x LED 630 LM WITH COLD DIFFERENT LIGHT IN A SET WITH CABLE HARNESS FOR LAMP CONNECTION WITH FUSE, RELAY AND ON-OFF SWITCH Production:

Original product of the TruckLED brand, symbol: 3.00.1.05.012.1

Application:

Application versatile, including as work and additional lighting in agricultural, construction and forestry vehicles and machines, as well as as work and additional lighting in trucks, buses, campers, caravans, boats and yachts.

Used for lighting utility rooms, garages, workshops, gazebos , gardens and yards.

Technical data:

Number of LEDs: 5

Number of lumens: 630

Power consumption: 12 W

Voltage: 12V DC, 24V DC

Light flux: scattered (flood)

Light color: cold

Lamp cable : 300 mm (with a hermetic set of plug and socket DT 2 PIN)

Length of the wire harness: 3000 mm

Additional equipment of the wire harness: 30A fuse, 40A relay, on-off switch

Maximum power consumption for the wire harness: 120 W

Mounting: handle, screw and nuts (included)

Packaging: dimensions 95x55x120 mm

Lamp weight: 216 g

Lampshade material: polystyrene (PS), high-transparency plastic, crack-resistant

Housing material: aluminum (AL) with very good properties heat dissipation (acts as a heat sink)

Certificates: ECE R10 for use throughout the European Union

Tightness class: IP67 (resistant to rain, dust and short-term immersion in water)

Electromagnetic compatibility approval: does not cause electromagnetic interference

Instructions for use:

in order to properly install and use the lamps, it is recommended to read the instructions to ensure safe use and durability of the product

the device must be installed in a place inaccessible to children

in case of replacing the existing filament/halogen lighting with LED lighting, no changes are required in the installation, apart from replacing the lamps themselves, when installing new/additional LED lighting, the current carrying capacity of the switch to which the lamp is to be connected should be verified. If the current carrying capacity of the switch to which we want to connect LED lighting is exceeded, an additional relay should be used