Work light 18w LED lamp front side rear 4x4

AUCTION SUBJECT:

Specialized 6x LED work lamp with a power of 18 W with diffused work light, suitable for installation on vertical surfaces.

Application: additional external work lighting, front side or rear lamps in agricultural and construction machines, forklifts, off-road vehicles, etc. .

The lamp is attached to the wall/partition or holder with two M5 screws.

Powder-coated aluminum housing, acting as a heat sink, is equipped with a venting/pressure equalizing membrane in the lamp, preventing fogging.

Technical data of the KML0163-FL LED lamp:

- supply voltage: 12/24V DC

- power consumption: 16W* max

- actual current consumption when powered by 13.8V: 0.95A

- light source: 18 x LED

- type of lighting: wide work light with cut-off from the top

- theoretical light flux: 830lm*

- color temperature: 6500K

- service life: 50,000h

- operating temperature: -40 to +80 degrees C

- housing: metal, aluminum alloys

- protection level: IP67*

- front glass : polycarbonate

- weight: 0.21kg

- dimensions: width 170mm, depth 50mm, height 28mm

- installation: on vertical surfaces, does not require additional relays

- set includes: lamp with cable approx. 30cm, anti-vibration pads, mounting screws , hex key

*based on the manufacturer's technical data

Thanks to the use of special optics, the light is cut off horizontally - the scattered light beam is directed forward and down.

At our other auctions you can buy other models of LED lamps as well as switches and accessories