Strong wires, jumper cables 600a 4m 12 24v

Jumper cables 12/24V 4m 600A with cover SKRAW-MET CODE: [3052] Jumper cables are designed to support starting a vehicle with a discharged battery using electricity taken from the battery of another vehicle.

Very useful in the basic equipment of the car - especially in winter, when Low temperatures make it easier for a discharged battery to occur. A bundle with a thick weave made of the highest quality copper-plated wires. Copper-plated clamps, which ensures:

very good current flow,

effective and quick engine start,

no overheating of cables

efficiency at extremely low temperatures

Technical specifications: Maximum current: 600 A

Cable length with clamps: 4 m

Cable diameter: 7.5 mm

Length of clamps: 140 mm

Stroke of clamp clamp: 25 mm

Resistant to very low and high temperatures: -70°C to +160°C

Material: Wires: copper-plated

Clamps: copper-plated

Strong clamps enable safe using cables in the most difficult conditions.

Cables packed in a practical cover to protect against dirt.On the other side of the cover there is an instruction manual, making it easier to start a disabled car with a discharged battery.

In our other auctions you will also find cables of other lengths and maximum currents .The parameters of the jumper cables must be appropriate to the current consumed by the battery starter. 200A jumper cables are intended for starting engines with a capacity of up to 900 cc.

400A jumper cables are intended for starting engines with a capacity of up to 1400 cc.

600A jumper cables are intended for for starting engines with a capacity of up to 2000 ccm.

For starting diesel engines, use cables 600 - 1800A.