Hydraulic distributor 1 sec 120l with latch

1-section hydraulic distributor 120l with a latch MIZAR number: 35448

1-section hydraulic distributor with a latch

Perfect for controlling a hydraulic motor. A lever with a latch allows the engine to run without having to constantly hold the lever. It can be used in many different machines and devices that use hydraulic drives, including: conveyors, industrial sawmills, screw conveyors, etc. Used, among others, for expansion or modification of hydraulic systems in industrial, forestry or construction machines.

Specification:

Number and type of sections:

1 section - regular with a latch - allows you to control hydraulic motors and double-acting cylinders.

ATTENTION! If you use a distributor with a latching lever to control the actuator, you must know that the lever does not automatically snap back after the cycle is completed. The overflow valve is then activated and the pump is loaded until the lever is manually moved to the neutral position.

Control:

lever mounted on the distributor

Connections:

Section outputs (A and B) - 1'

Supply (P*) - 1'

Return (T*) - 1'

Pressure output (N*) -1'

* - markings embossed on the distributor housing to identify the connections

Other parameters:

Temp. operation in the range from -40°C to +60°C

Maximum supply pressure: 250Bar

Maximum return pressure: 50Bar

Maximum pressure on the sections : 300Bar

Overflow valve factory set to 175Bar

Oil flow 120L/ min.

The distributor is equipped with a non-return valve and a overflow that also serves as a safety valve.

Made in Bulgaria.

High-quality manifold. Made in Bulgaria.

Control: levers with latch

The input section has an overflow valve and a non-return valve

Universal distributor, example application: Cyclops, Tury, Loaders, Forklifts and many others.

MIZAR number: 35448