Hydraulic distributor 1 sec 80l electric 24v

1-SECTION HYDRAULIC DISTRIBUTOR Z80, ELECTRICALLY CONTROLLED 24VProduction:

Original product of the Badestnost Bulgaria brand, manufacturer's symbol: Z80 A ES3 24VDC G, symbol: 1.10.55.010.1

Application:

It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

The distributor is adapted to various types of machines such as: agricultural machines, tractors, sprayers, aurochs, cyclopes, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines and other devices with a hydraulic system.

Technical data:

The set includes a set of electrical plugs.

Recommended oil flow in the system: 0 - 80 l/min.

Example control: double-acting actuator.

Possibility of serial connection to an existing system (pressure sleeve required).< p>

Control:

Three-position slider (1 - 0 - 2), spring-loaded, i.e. it returns to the neutral position on its own after cutting off the power supply. When the slider is in the neutral position (0), the oil flows freely through the distributor to the return channel, the pump then does not work on pressure and is relieved.

Principle of slider operation:

Position 0 neutral (power supply to both coils is cut off) the actuator piston rod is standing - the oil goes to the overflow.

Working position 1 (power supply only to the first coil) the actuator piston rod extends.

Position 2 working (power supply only to the second coil), the actuator piston rod retracts.

On the right, a hydraulic diagram of the distributor:

Current:

Power supply direct current (DC) ) 24V

Electrical plugs have diodes that light up when current is applied to the coil.

Connection:

Power supply from the pump (P): internal thread BSP 1/2''

Return to the tank (T): BSP 3/4'' internal thread

Outlet to sections (A, B): BSP 1/2 internal thread ''

Series connection (N): BSP 3/4 internal thread'

Pressure range:

Maximum supply pressure: 250Bar

Maximum return pressure: 50Bar

Maximum pressure on the sections: 300Bar

The overflow valve is factory set to 180Bar ± 30 Bar.

It is recommended to check and set appropriate pressure before starting.

Possibility of self-adjustment, full turn change by 30Bar.

Oil types recommended by AGRICOLA:

Thinner, high-quality oil: LOTOS AGROL BOXOL 26

Thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46

Recommended oil temperature range:

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C