Hydraulic connection nipple g1 2 m18x1 5

HYDRAULIC CONNECTIONSTRAIGHT NIPPLE G1/2' M18 Application:

The hydraulic connection is perfect for hydraulically powered machines and devices.

It can be used in agriculture, horticulture, forestry and construction.

The connection is designed to be screwed into the body of, among others: a pump, a distributor, etc.

It is used to connect the main components in the hydraulic system with hydraulic lines.

There is a gasket on the connection side ED, which fully seals the system.

The other side is responsible for connecting the hydraulic conduit or elbow. Sealing occurs after tightening the joints on the self-sealing cone. This ensures complete sealing of the system.

The connection is designed to be screwed into the body. It should not be used to connect two hydraulic lines.

Technical data:

Clamping cone angle: 24° (typical for the Polish standard)

Total length H: 34, 5mm

Nominal diameter of the passage: 10mm

G1 thread on the body side: external inch 1/2'

M2 thread on the cable side: external metric 18x1.5

Connection version: light

Nominal pressure: 180bar

Maximum pressure: 230bar

Liquid type: hydraulic oil

Material:

weldable steel, galvanized, corrosion-resistant