1-section distributor, 120l, engine control

1-SECTION HYDRAULIC DIVIDER P120 WITH SPRING-BASED LEVER WITH AUTOMATIC. POSITIONING TO POSITION 0 WITH A SLIDE TO CONTROL THE HYDRAULIC MOTORProduction:

Original product of the Badestnost Bulgaria brand, manufacturer's symbol: P120 D1 GKZ1, symbol: 1.10.20.015

Application:

It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

The distributor is adapted to various types of machines such as: agricultural machines, weeders, tedders, mowers, construction machines, sweepers , mixers, industrial machines and other hydraulically controlled devices in which one section controls a hydraulic motor.

Thanks to a special slider, the distributor is ideal for controlling a hydraulic motor.

The special design of the slider eliminates the jerking of the machine when turning the engine drive on and off.

The engine starts and brakes gradually without load. Thanks to this slider design, the distributor is ideal for controlling the engine, but is not suitable for controlling a hydraulic cylinder.

Technical data:

Recommended oil flow in the system: 0 - 120 l/min.< p>

Example control: hydraulic motor

Possibility of serial connection to an existing system (pressure sleeve required).

Control:

Three-position lever (1 - 0 - 2), on a spring that returns itself to position 0 (neutral):

Neutral position 0 (lever set vertically), the engine does not run - the oil goes to the overflow.

Working position 1 (lever set at an angle forward), the engine rotates to the left.

Working position 2 (lever set at an angle backwards), the engine turns to the right.

On the right side, hydraulic diagram of the distributor:

Connection:

Supply from the pump (P1, P2): BSP internal thread 1''

Return to tank (T1, T2): BSP internal thread 1''

Sections (A, B): BSP internal thread 1''

Series connection (N): internal thread M36x1.5

Pressure range:

Maximum supply pressure: 250Bar

Maximum return pressure: 50Bar< p>

Maximum pressure on the sections: 300Bar

The overflow valve is factory set to 175Bar ± 30 Bar.

It is recommended to check and set the appropriate pressure before starting.

Possibility of self-adjustment, full turn change by 30Bar.

Oil types recommended by AGRICOLA:

Thinner, high-quality oil: LOTOS AGROL BOXOL 26

Thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46

Recommended oil temperature range:

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C