Hydro 4s 40l 4xa1 distributor for badestnost lines

4-SECTION HYDRAULIC DISTRIBUTOR P40 CONTROLLED BY CABLES AND JOYSTICK OR LEVER Production:

Original product of the Badestnost Bulgaria brand, manufacturer's symbol: 04P40 A1A1A1A1 GV1, symbol: 1.10.30.040

Application:

It is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

The distributor is adapted to various types of machines such as: agricultural machines, tractors, sprayers, aurochs, cyclops, loaders HDS, construction machines, loaders, excavators, sweepers, industrial machines and other hydraulically controlled devices.

It is used wherever, for reasons of safety, better control comfort or the need to maintain cleanliness, it is required to install the distributor outside cabin. Only the control unit remains in the cabin, e.g. a joystick, which is connected to the distributor via cables.

Technical data:

Recommended oil flow in the system: 0 - 40 l/min. Example control: four double-acting cylinders.

Possibility of serial connection to an existing system (pressure sleeve required).

Control:

All three-position sliders (1 - 0 - 2), on a spring, i.e. they return to the neutral position when we release the joystick or lever. In the neutral position, the oil goes to the overflow and the pump is then relieved.

It is recommended to control it in three ways:

two joysticks

one joystick and two cable levers

four levers on a cable

On the right side there is a hydraulic diagram of the offered distributor:

Connection:

Power supply from the pump (P1, P2) : BSP 1/2'' female thread

Return to tank (T1, T2): BSP 1/2'' female thread

Sections (A1, A2, A3, A4, B1, B2, B3, B4): BSP internal thread 3/8''

Series connection (N): BSP internal thread 1/2'

Pressure range:

Maximum supply pressure: 250Bar

Maximum return pressure: 50Bar

Maximum pressure on the sections: 300Bar

The opening pressure of the overflow valve increases proportionally with with increasing flow:

180 bar at 10 l/min

190 bar at 20 l/min

200 bar at 30 l/min

210 bar at 40 l/min

Sets for precise pressure measurement can be found in the Manometers - measuring sets section

It is recommended to check and set the appropriate pressure before starting.

Possibility of self-adjustment, full turn change by 30Bar.

Oil types recommended by AGRICOLA:

Thinner, high-quality oil: LOTOS AGROL BOXOL 26

Thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46

Recommended oil temperature range:

Permissible ambient temperature: -40 C to +60 C

Permissible oil temperature: -15 C to +80 C

Important!!!

A distributor with lever control is inserted into the package, sets for screwing the lines are sent loose in the same package.

To adapt the distributor to control the cables, it is necessary to unscrew the bodies with the lever and screw the cable sets in their place. Installation is very easy and does not require advanced tools.

After installing the cable sets, the bodies with levers remain at the customer's disposal.