Hydraulic connection, straight nipple 20 18 edge

STRAIGHT HYDRAULIC CONNECTION, STRAIGHT NIPEL M20 M18, SKRAW-MET CODE: [7318] Application: Most often used in actuators for BRZEG type spreaders

The hydraulic connection is perfect for hydraulically powered machines and devices.

Maybe be used in agriculture, horticulture, forestry or construction.

The connection is designed to be screwed into the body of, among others: pump, distributor, etc.

It is used to connect the main components in the hydraulic system with hydraulic lines .

On the connection side there is an ED seal, which fully seals the system.

The other side is responsible for connecting the hydraulic conduit or elbow. Sealing occurs after tightening the joints on the self-sealing cone. This ensures complete sealing of the system.

The connection is designed to be screwed into the body. It should not be used to connect two hydraulic lines. For this purpose, connectors available at other auctions are used.

Technical data: Clamping cone angle: 24° (typical for the Polish standard)

Total length: 31.5mm

Nominal diameter of the passage: 10mm

M1 thread on the body side: external metric 20x1.5

M2 thread on the cable side: external metric 18x1.5

Version connections: light

Nominal pressure: 180bar

Maximum pressure: 230bar

Liquid type: hydraulic oil

Material: weldable, galvanized steel corrosion resistant