Bbb 3x g1 2 hydrolider tee connector

HYDRAULIC CONNECTOR BBB TEE 1.2' Production:

Hydrolider, symbol: 1.60.57.012.3

Application:

Widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

Tee connector, standardized light version with a conical self-seal when tightening. Designed to connect three hydraulic lines or to connect with other connectors with the same conical system.

It does not have rubber seals or places for a seal, it is not suitable for screwing into the body of e.g. a pump, actuator or distributor. For this purpose, there are connections that can be purchased at our other auctions.

Helpful data:

BSP 1/2' thread diameter measured with a caliper:

Outer diameter [mm]: 20.5 - 20.9

Inner diameter [mm]: 18, 6 - 19.0

Technical data:

Clamping cone angle: 60° (typical for the European standard)

Nominal bore diameter: 11mm

Thread on all sides: external inch BSP 1/2'

Version: light

Pressure nominal: 180bar

Maximum pressure: 230bar

Liquid type: hydraulic oil

Material:

welded steel, galvanized, corrosion-resistant