COIL - electromagnet of the hydraulic tipping pump 12V 200A KOD SKRAW MET: [0291] Manufacturer: SM-G (SKRAW MET GROUP) Application: The coil is used in delivery vehicles and is used to switch on the electric pump. The coil is perfect for electrically powered machines and devices .
Can be used in agriculture, horticulture, forestry and construction.
Technical specifications: Voltage: 12V
Current: 200A
Resistance: 5.4Ω
Connection material: Copper
Permissible temperatures: From -40°C to +82°C
Connection method: Vertical or horizontal
Maximum operating time: 6 minutes
Contactor type: SPST NO
Coil size (mm): Installation instructions: Select the coil mounting location.
Using the coil as a pattern, mark where to drill the mounting holes.
Using a 1/4' drill bit, drill holes in the locations marked in the previous step.
Install the coil using screws and 1/4' washers.
Connect the wires according to the connection diagram.
Connection diagram: 1- Ground
2- Ground
3- Voltage
B1- Power supply
B2- Switch
B3- Current receiver
B4- Fuse