Hydraulic connection, straight nipple 20 18 edge

STRAIGHT HYDRAULIC CONNECTION NIPEL M20 M18 SKRAW-MET CODE: [7318] Application: Most often used in actuators for BRZEG type spreaders

The hydraulic connection is perfect for hydraulically powered machines and devices.

It can be used in agriculture, horticulture, forestry and construction.

The connection is designed to be screwed into the body of, among others: a pump, a distributor, etc.

It is used to connect the main components in the hydraulic system with hydraulic lines.

On the connection side there is an ED seal, which fully seals the system.

The other side is responsible for connecting the hydraulic line or elbows. Sealing occurs after tightening the joints on the self-sealing cone. This ensures complete sealing of the system. The connection is designed to be screwed into the body. It should not be used to connect two hydraulic lines. Connectors available at other auctions are used for this purpose.

Technical data: Clamping cone angle: 24° (typical for the Polish standard)

Total length: 31.5 mm

Nominal passage diameter: 10 mm

M1 thread on the body side: external metric 20x1.5

M2 thread on the cable side: external metric 18x1.5

Connection version: light

Nominal pressure: 180bar

Maximum pressure: 230bar

Liquid type: hydraulic oil

Material: weldable, galvanized, corrosion-resistant steel