Toyota mast forklift stickers with logo 45 cm

STICKERS: TOYOTA with logo Dimensions: 45 cm

Price includes: 2 pieces (for the right and left side)

Stickers are cut from self-adhesive foil from renowned manufacturers (resistant to weather conditions - frost, sun, mud, rain)

Stickers are cut using a plotter technique (cutting along the outline) according to the individual customer order (pattern, size, color, etc.)

Stickers can be covered with a clear, non-solvent varnish (CLEAR)

All stickers have a transport foil, which makes them easy to stick

The sticker is the black part of the graphic, all white the spaces in the graphics below are the background, i.e. the surface on which we stick the graphics, after sticking there will be only elements cut from the foil, without a background

After purchasing, you must provide:

Size of stickers

Color of stickers

If you do not provide a color or size pattern after purchase, you will receive a pattern and the color from the thumbnail of the maximum size from the auction

the inscription TOYOTA vertical on the mast on the FORKLIFT FORKLIFT with the logo The actual colors may differ slightly from the colors in the photo

APPLICATION INSTRUCTIONS:

Clean and degrease (e.g. extractive spirit) the surface on which the sticker will be glued.

Press the sticker to the transport foil with a squeegee, making several sliding movements back and forth.

Gently peel off the backing paper from the transport foil with the sticker. Do it from as wide an angle as possible. If the sticker does not come off the paper, press it against the transfer foil again and try again.

To avoid air bubbles, stick the sticker starting from one side. Be careful not to stick the entire sticker at once. Then gradually press the transfer foil with a squeegee until it reaches the other side of the sticker. Press the entire sticker again with a squeegee.

Remove the transport foil slowly and carefully at a large angle. Make sure that all elements are glued well and that the transport foil does not come off. If this happens, stick this part back on and press firmly.

Recommended gluing temperature above +10 °C. The adhesive achieves 100% adhesion 24 hours after application. Do not wash the surface for 48 hours after applying the sticker.