Diper agent for removing heavy dirt

Agent for removing the heaviest dirt, new product

producer: k2

index: 00 00 3091

a strong two-component alkaline detergent with high concentration and foaming properties. Removes even the most stubborn dirt from car bodies and tarpaulins used on flatbeds and trucks etc.

It is also perfect for cleaning tanks, floors in garages and service stations, mechanical workshops and factory sheds.

How to use:

Shake well before pouring any part of the product for use.

Dilute the product with water from a minimum of 10 to a maximum of 100 parts, depending on how much dirt there is and the size of the surface area to be cleaned.

When used with atomizing spray: dilute from 1:30 to 1:100. Spray the solution onto a dry surface and leave for a short period before rinsing off using a high-pressure spray. When used with a high-pressure water spray: dilute the product at a ratio of 1:20 to 1:30. Wait until foam begins to flow and proceed to wash the vehicle, surfaces etc., then rinse with plenty of clean water.

When used to wash floors:

dilute the product by 1:20 to 1:60 parts. Apply over the surface by hand or using an automatic floor cleaner. Then rinse.