Dekalin 6103312 underbody protection preparation

PRODUCT

Dekaphon 9735 is a durable protective coating with anti-corrosion properties. Dekaphon 9735 is also used in underbody protection. Designed specifically for wooden floor panels used in the construction of caravans, campers, recreational vehicles (RVs). Dekaphon 9735 has excellent sound effect dampening properties. After drying, a strong, resistant film remains.

APPLICATIONS

Dekaphon 9735 is used as a protective underbody coating to protect wooden floor panels, e.g. plywood. Dekaphon 9735 is also used in anti-corrosion protection, for example for the chassis of caravans, campers, wheel housings in cars, trucks and coaches. Due to its wide application, it is used in:

✔ Recreational Vehicle (RV) Industry: OEM and AM

✔ Automotive industry

✔ When building city buses

✔ When building caravans and campers ✔ Workshops

FEATURES

✔ Proven durability

✔ (no dust, no evaporation)

✔ Soundproofing properties ✔ Does not work on a vertical surface

✔ Very good adhesion to wood ✔ Very good resistance to weather conditions and abrasion STICKY

It adheres very well (without special pre-treatment) to a clean, dry, dust-free and degreased surface. It is advisable to test adhesion on other materials.

HOW TO USE

Shake before use. The surface to be painted must be clean, dry, degreased, free of rust and dust. The optimal spraying distance is approximately 30 cm. Spray the surface with Dekaphon 9735 until the appropriate layer thickness is achieved. Clean tools with solvent after use. A 0.5l container is enough for 1.25 m2 of surface.

Technical data

Basic material: Mixture of kerosene, solvents and propellants Consistency: Aerosol

Curing/setting method: Solvent emission

Density (20°C), DIN 51757: Ca. 0.75 kg / liter

Cleaning: Solvent (fresh), mechanical (hardened)

Thinner: NA

Solids content (DIN 53216) (3 hours at 120 ° C): Ca. 33%

Viscosity (20°C): ND

Temperature resistance (cured): -25°C to +80°C

Resistance (20°C), hardened: water, salt mist, oils, weak alkalis and acids

Application: 0.4 kg/m2 0.4 liter/m2 400 wet layer

Touch dry (20°C, 65% RH): approx. 75 minutes (wet)

Completely dried (20°C, 65% RH): approx. 135 minutes (wet)

Bending test (DIN 53152, +70°C): No scratches, no loss of adhesion

Bending test (DIN 53152, -30°C): No scratches, no loss of adhesion

Adhesion test (DIN 53151): Gt 0 on various metal, PVC surfaces Colors (standard): Black

Packaging: Spray 500 ml Aerosol

STABILITY DURING STORAGE

The product can be stored at temperatures from 10 to 30° C. The packaging must be protected against direct sunlight and heat.

PACKING

Aerosol spray 500 ml.