Cover for a caravan 550 575 cm English

POLCOVER caravan cover COVER SIZE:

trailer body length - 575cm (maximum length from the profile, including lamps, front box, bumpers and possibly a bicycle rack)

width - to choose from: 205, 210, 215, 220, 225, 230, 235 cm

cover height approx. 225cm

cover version: English (door on the left side, driver's side)

COVER FEATURES

Polish caravan cover.

Made of high-quality, thick, resistant materials to weather conditions.

The cover material is equipped with a UV filter that protects the material from the sun.

Soft on the inside, safe for the trailer body.

Waterproof material containing foil on the entire upper part of the cover protects the trailer against precipitation.

Breathable material with micropores on the side parts of the cover allows air circulation under the cover.

SOLID FIXING

The cover is fastened with a belt around the trailer.

It prevents the cover from being torn off the trailer and ensures proper positioning of the cover on the trailer. The fastening belt used in the cover runs through wide, strong eyelets. They will not wear out quickly like tunnels with string, and the belt included in the set will allow you to firmly pull the cover under the door sills. The fastening belt is finished with a buckle with a tensioner, which facilitates installation.

STRAPS ON THE FRONT OF THE COVER

Two horizontal straps are sewn into the front of the cover, above the trailer drawbar. After tightening them, the cover is tightened and fits perfectly to the shape of the trailer. This not only ensures aesthetics, but above all limits the movement of the cover in the wind.

TWO ZIPPERS FROM THE ENTRANCE SIDE OF THE TRAILER:

allows entry to the trailer,

covered from the inside and outside,

trimmed,

frost-resistant,

a clasp at the bottom to prevent the zipper from being unfastened.

cover version: English (door on the left, from the driver's side)

TRAILER PROTECTION:

IN WINTER - against frost, ice and snow,

IN SPRING - against pollen, resin and tree sap , dust, sand, rain and wind, against bird droppings

IN SUMMER - against UV radiation,

IN AUTUMN - against falling leaves, cones, rain and wind

POSSIBILITY OF SEWING TO MEASURE

If you want us to make a cover according to the dimensions of your trailer , measure it according to the diagram below and provide these dimensions when ordering.

Otherwise, select the desired width of the cover and we will send a cover in a universal size.

If the trailer has other, non-standard shapes, please attach a photo or provide the exact trailer model.

IMPORTANT NOTES

Dimension S1 (length at the bottom of the profile) must be the maximum dimension, including the trunk/lamps/bumpers, etc.

Dimension D (width) must include the awning over the window if installed.

Dimension H (height) is the height of the structure itself. (not to the ground) possibly with railings (when making the cover, we add an allowance for the antenna/air conditioning, etc.)

Dimension S2 (length at the top) is measured approximately 20 cm below the upper edge of the trailer to avoid rounding.