Hysofix 706 cyanoacrylate glue 50g

Cyanoacrylate glue HYSOFIX 706 - 50g SHORT DESCRIPTION

HYSOFIX 706 Cyanoacrylate Glue - 50gHYSOFIX 706 Cyanoacrylate Glue - 50g

Warranty: 24 months

Model: HYSOFIX 706 Cyanoacrylate Glue - 50g

Capacity: 50 ml

product_code: 0039

weight: 0.06 kg

dominant color: Transparent

type: Cyanoacrylic

type: Glue

NAME PRODUCT

HYSOFIX 706 Cyanoacrylate glue - 50gHYSOFIX 706 is a new generation triple distillation glue.

Adhesive based on modified methylcyanoacrylate intended for joining a wide group of materials: metal, wood, porcelain, glass, ceramics, rubber, cork, paper, stone, PVC ( gluing tarpaulins, banners) and other materials and combinations of these materials.

Adhesive particularly suitable for joining small parts.

The adhesive has good fatigue resistance, very high shear and tensile strength

How to use the glue correctly?Glued parts should be quickly connect because the adhesive's shelf life is very short.

Air humidity is generally sufficient to initiate hardening in a few seconds and achieve manual strength (full mechanical strength and chemical resistance is achieved only after 24 hours).

The best results are achieved in humid conditions relative air 40-60%.

Activators should be used to speed up the polymerization and hardening process.

The size of the gap also has a significant impact on the speed of hardening (the larger the gap, the slower the glue sets) and the type of glued materials.

Setting timeChloroprene and nitrile rubber : 5...15

Extensible rubber: 2...5

EPDM: <,5<,/strong>,

PlasticsPVC: 2...10

Phenel resins: 5...15

Polymers ABS: 2...6

MetalsSteel, Aluminum, Zinc: 6...30

Physical properties Color: transparent

Viscosity: 20..40 [mPa s]

Density: 1.05 [g/cm3] (25°)

Max. filling gap: 0.05 [mm]

Flash point (ISO2592): 85 [°C]

Storage time: 12 months 10 [°C]

Gluing speed with active. <,3 [seconds]<,/strong>,

Gluing speed without activation. 5..40 [seconds]

Adhesive properties Tensile strength: 5..26[N/mm2]

Shear strength: 11..19[N/mm2]

Impact strength: 15...20[N mm /mm2]

Max. operating temperature: -50[°C] + 80[°C]

Softening temperature: 160[°C] ... 170[°C]

Electrical resistance: >, 10 [Ωmm]

Dielectric strength: 25 [kV mm]

Preparation: Joined elements should be thoroughly cleaned of remnants of old glue and degreased thoroughly, preferably with REINIGER remover. HYSOFIX 706 glue should be applied sparingly to one of the glued surfaces and quickly press the bonded parts.

When bonding non-bondable materials (polyolefins), the surface of the material should be activated with the AKTYWATOR C product.

The glue itself can be activated with the AKTYWATOR C product, which accelerates the action of the glue. and hardens its excess.

Use the activator to moisten the glue in the joint or moisten the joint surfaces before gluing and after drying, glue.

The activation process can be repeated many times by applying subsequent layers of glue. In this way, you can obtain a thick joint (as in the case of epoxy resins) with high hardness, mechanical strength and a very short setting time.

It is not recommended to use this product for devices with pure oxygen, chlorine or other strongly oxidizing substances.