Hysofix 712 cyanoacrylate glue 50g

Cyanoacrylate glue HYSOFIX 712 - 50g SHORT DESCRIPTION

HYSOFIX 712 Cyanoacrylate Glue - 50gHYSOFIX 712 Cyanoacrylate Glue - 50g

Warranty: 24 months

Model: HYSOFIX 712 Cyanoacrylate Glue - 50g

Capacity: 50 ml

product_code: 0040

weight: 0.06 kg

dominant color: Transparent

type: Cyanoacrylic

type: Glue

NAME PRODUCT

HYSOFIX 712 Cyanoacrylate glue - 50gHYSOFIX 712 is a new generation triple distillation glue.

Adhesive based on modified methylcyanoacrylate intended for joining a wide group of materials: metal, wood, porcelain, glass, ceramics, rubber, PVC (gluing tarpaulins, banners) and other materials and combinations of these materials.

Adhesive particularly suitable for joining small parts.

The adhesive has good fatigue resistance, very high shear and tensile strength.

How to use the glue correctly?Glued parts should be joined quickly because the shelf life adhesive to use is very short.

Air humidity is generally sufficient to initiate curing in a few seconds and obtain manual strength (full mechanical strength and chemical resistance is achieved only after 24 hours).

The best results are obtained at a relative air humidity of 40-60 %.

Activators should be used to speed up the polymerization and hardening process.

The size of the gap also has a significant impact on the speed of hardening (the larger the gap, the slower the glue sets) and the type of glued materials.

Advantages: 6 times greater dynamic strength and 10 times greater times greater peel strength

Compared to conventional cyanoacrylate adhesives, very high shear strength (240 kg/cm2 in the case of a steel-steel connection)

Temperature load capacity up to +135°C (with such a high load, the adhesive is

Even more durable shear strength 60 kg/cm² in the case of a steel-steel connection)

Very good resistance to water, which is unique for cyanoacrylate adhesives with a viscosity of approx. 3,000 cPs.:

Technical data: Chemical type: modified ethylcyanoacrylic

Color: colorless, transparent

Viscosity: 2500...3000 [cP] at 20ºC

Specific gravity: 1.08 [g/ml]

Max. filling gap 0.15 [mm]

Flash point (ISO 2592): >.85ºC

Temperature resistance -50°C to +135°C

Thermal conductivity (ASTM C177) 0.1

Resistance to shear stresses (DIN 53283) 24 N/mm²

Initial strength aluminum 30 - 50 seconds

Initial strength rubber 20 - 40 seconds

Full strength 24 hours

Gluing speed with active <, 6 [seconds]

Gluing speed without activation. 5...60 [seconds]

Solvent content: none

Preparation: The joined elements should be thoroughly cleaned of remnants of old glue and degreased well (IPA plastics), preferably with REINIGER remover (do not use gasoline or solvents)

HYSOFIX glue 712 should be applied sparingly to one of the glued surfaces and quickly press the bonded parts.

Strength is achieved in a few to several seconds.

Full hardening after 24 hours.

The best conditions are achieved by gluing in optimal conditions, i.e. at room temperature (approx. +20°C) and a relative air humidity of approx. 65%.

When gluing non-bonding materials (polyolefins), the surface of the material should be activated with PRIMER PP/PE.

The adhesive itself can be activated with AKTYWATOR C, which accelerates the action of the glue and hardens its excess. We use the activator to wet the glue in the joint or to wet the joint surfaces.