Engine cushion, vibration isolator, 75x40 m12 b

HIGH QUALITY POLISH PRODUCT, NO!!! 'MADE IN CHINA'

PRICE/QUALITY RATIO = very good

MANUFACTURER OF RUBBER PRODUCTS COMPANY 'MARGO' OFFERS: AUCTION CONCERNING: RUBBER SHOCK ABSORBER 75x40 mm version B - M12 x 27 mm screw on one side, M12 nut on the other side vibration isolators made of rubber resistant to weather conditions, grease, oil, temperature up to 120 degrees Celsius, with a high vibration damping coefficient and hardness of 65ShA. Tensile strength: - rupture of the rubber-metal connection >,>, 1000 kg, rubber rupture >,>, 1000 kg

ATTENTION! !!

PRODUCT 100% OWN PRODUCTION

HIGH QUALITY RUBBER, thanks to the use of a mixture whose base consists of three specially selected rubbers (competitors' products are a mixture based on natural rubber, which is not resistant to oils and greases and has poor mechanical parameters)

WELDED CONNECTION OF METAL ELEMENTS (competitors screw the screw into a thin sheet of metal, which causes quick loosening of the connection, increases sensitivity to vibrations and leads to damage to the vibro-isolator)

3.5 mm THICK SHEET SHEET (competitors use thin sheet of 1.5 to 2 mm, which causes the sheet metal to break and separate from the rubber faster)

RUBBER-METAL COMBINED WITH INCREASED MECHANICAL AND DYNAMIC RESISTANCE, double layer of glue, increased adhesion to metal thanks to a specially prepared surface and the use of a special primer.

SHOCK ABSORBERS CAN BE USED TO DAMPEN VIBRATIONS IN INDUSTRIAL EQUIPMENT, E.G.:

COMPRESSORS, FANS, TABLE GRINDERS, SAWS, LATHES, MILLING MACHINES, ETC.,

ALSO IN CONSTRUCTION MACHINES

E.G.: ROLLERS, COMPACTIONERS, ETC.

WE ALSO OFFER OTHER DIMENSIONS NOT INCLUDED IN THE TABLE THANKS TO CONSTANTLY EXPANDING OUR PRODUCT OFFER THAT.