Engine mount, vibration isolator, 60x65 m16 b

HIGH QUALITY POLISH PRODUCT, NO!!! 'MADE IN CHINA'

PRICE/QUALITY RATIO = very good

MANUFACTURER OF RUBBER PRODUCTS COMPANY 'MARGO' OFFERS: RUBBER SHOCK ABSORBER 60 x 65 mm - version B - on one side an M16 X 37 mm screw, on the other side an M16 nut, vibration isolators made of durable rubber resistant to weather conditions, grease, oil, temperature up to 120 degrees Celsius, with a high vibration damping coefficient and hardness of 65ShA.

Tensile strength: - rupture of the rubber-metal connection >,>, 1000 kg, rubber rupture >,>, 1000 kg

ATTENTION! !!

PRODUCT 100% OWN POLISH PRODUCTION

HIGH QUALITY RUBBER, thanks to the use of a mixture whose base is made up of three specially selected rubbers (in the case of competitors it is a mixture based on natural rubber, which is not resistant to oils and greases and has poor parameters mechanical)

WELDED CONNECTION OF METAL ELEMENTS (competition screws are screwed into a thin sheet of metal, which causes quick loosening of the connection, increases sensitivity to vibrations and leads to damage to the vibro-isolator)

4.5 mm THICK SHEET SHEET (competitors use thin sheet of 1.5 to 2mm, which causes the sheet metal to break and become detached from the rubber faster)

RUBBER-METAL COMBINED WITH INCREASED MECHANICAL AND DYNAMIC RESISTANCE, double layer of glue, increased adhesion to metal thanks to a specially prepared surface and the use of a special primer.

SHOCK ABSORBERS CAN BE USED TO DAMPEN VIBRATIONS IN DEVICES INDUSTRIAL, E.G.: COMPRESSORS, FANS, TABLE GRINDERS, SAWS, LATHES, MILLING MACHINES, ETC., AND ALSO IN CONSTRUCTION MACHINES, E.G.: ROLLERS, COMPACTIONERS, ETC.

WE ALSO OFFER OTHER DIMENSIONS NOT INCLUDED IN THE TABLE THANKS TO CONSTANTLY EXPANDING OFFERS YOU ARE OURS PRODUCTS.