Engine cushion, vibration isolator, 40x50 m8 a

HIGH QUALITY POLISH PRODUCT, NO!!! 'MADE IN CHINA'

PRICE/QUALITY RATIO = very good

MANUFACTURER OF RUBBER PRODUCTS COMPANY 'MARGO' OFFERS: RUBBER SHOCK ABSORBER 40 x 50 mm - version A - M8 x 27 mm screw on 2 sides, vibration isolators made of rubber resistant to weather conditions, lubricants, oils, temperature up to 120 degrees Celsius, with a high vibration damping coefficient and hardness of 65ShA. SHOCK ABSORBERS CAN BE USED TO DAMPEN VIBRATIONS IN INDUSTRIAL EQUIPMENT, E.G.: COMPRESSORS, FANS, TABLE GRINDERS, SAWS, LATHES, MILLING MACHINES, ETC., AND ALSO IN MACHINES OH CONSTRUCTION

E.G.: ROLLERS, COMPACTIONERS, ETC.

Tensile strength: - rupture of the rubber-metal connection >,= 560 kg, rubber rupture >, >, 560 kg.

ATTENTION!!!

PRODUCT 100% OWN PRODUCTION

HIGH QUALITY RUBBER , thanks to the use of a mixture whose base is made up of three specially selected rubbers (in the competition it is a mixture based on natural rubber, which is not resistant to oils and greases, and has poor mechanical parameters)

WELDED JOINT OF METAL ELEMENTS (in the competition, the screw is screwed into a thin sheet metal, which causes quick loosening of the connection, increases sensitivity to vibrations and leads to damage to the vibro-isolator)

SHEET SHEET THICKNESS 3.0 mm (competitors use thin sheet metal 1.5 to 2 mm, which causes the sheet to break and detach from the rubber faster)

TOTAL RUBBER -METAL WITH INCREASED MECHANICAL AND DYNAMIC RESISTANCE, double layer of glue, increased adhesion to metal thanks to a specially prepared surface and the use of a special primer.