Emblem sticker 3D w2 original Ursus

Emblem. convex sticker 3D-w2 ORIGINAL URSUSemblem, convex sticker 3D-w2 ORIGINAL URSUS

is protected with two-component polyurethane (epoxy resin). The resins used in the production process are selected in such a way that, after mixing and drying, they create a flexible, transparent lens, which perfectly highlights the aesthetics of the print and protects the color.

The 3D-in2 convex emblem and sticker is resistant to abrasion, mechanical damage, and the harmful effects of sunlight, water and chemicals. The flexible coating allows it to be adjusted to small surface curves, thanks to which we fully use the adhesion potential of the foil adhesive.

*Emblem diameter: 50mm

*Rules for applying and storing 3D stickers:

*- always stick the 3D sticker on clean, smooth and degreased surfaces

*- the 3D sticker achieves full adhesion only 1-2 days after sticking

*- always stick at a positive temperature (the recommended working temperature for gluing is 10-25 degrees Celsius)

All original parts marked with the URSUS mark have the same high requirements that were met by every URSUS leaving the factory.

Thanks to these restrictive requirements, each of our parts installed in the old URSUS will give it a boost of energy for the next years of its operation.

Durability and an excellent price-quality ratio make our original parts extremely attractive also in terms of economy. .

Carefully defined recommendations, extensive inspections and comprehensive tests guarantee that every single original URSUS part is always made to a very high technical level.

If you are looking for spare parts for your Ursus, then choose original components: they are attractively priced, widely available and have an advantage that no other company can provide - Ursus itself supervises their production.

Responsible entity: Waryński Origin

Producer: Ursus Original

* - when storing, protect 3D stickers from getting dirty

Gallery