Copper angle 15x15mm thickness 1mm length 1000mm

CU-KR15X15X1 Copper angle, equal-sided with dimensions: 15x15mm - wall thickness: 1.0mm, length 1000mm - SHIPPING ONLY BY COURIER!!! Type: Copper angle, cold-bent

Grade: M1E Z4 (semi-hard)

Width: 15x15 mm

Thickness: 1 mm

Length: 1.0 m

Weight: 0.28 kg

You are buying: a 1-meter section

Pure copper - The angle is pure, not coated with any insulator.

Copper angle, cold-bent, made of 1 mm thick M1E Z4 sheet metal, external dimensions of the angle arms 15x15 mm, angle length 1000 mm (1 m).

The accuracy of the dimensions of the arms of this angle is +/- 2 mm for each arm. Length accuracy +/- 2 mm. Angle accuracy +/- 5 degrees. The edge of the angle is not sharp but slightly rounded (we do not have the ability to make these angles with a sharp edge).

The angle is made of uncoated sheet metal, all activities during its production are done manually and mechanically and sometimes we cannot avoid scratches on the surfaces of this angle. So before ordering, please take into account that some of the angles may have scratches (which is not subject to complaint). We will do our best to minimize these scratches, but we are not able to completely exclude them from the production cycle.

Application: Jewellery, Artistic jewellery, Handicraft, Modelling, Electronics, Automotive industry, Automation, Welding

M1E / Cu-ETP - copper produced in the electrolytic refining process - cathodic melted. It is characterized by high thermal and electrical conductivity, has high plasticity and impact strength. M1E/Cu-ETP copper is susceptible to plastic processing (especially in the annealed condition), it is susceptible to welding, brazing and soldering. M1E/Cu-ETP copper is very often used in industry - especially in the production of electrical and electronic components, in the production of cables and wires and in engineering applications.

Copper markings according to various standards:

EN: CW004A

ISO: Cu-ETP

DIN: E-Cu57/58

Wnr: 2.0060/2.0065

NFA FR: Cu-a1

UNS USA: C11000

BS GP old: C101

PN: M1E

Chemical composition of M1E/Cu-ETP (CW004A) (according to EN 573-1):

Cu : ≥99.9

Bi: ≤0.0005

O: ≤0.04

P: -

Pb: ≤0.005

Others total: ≤0.03

not included: Ag,O

NOTE! On request, we have a much wider range of copper angles in various dimensions, with the possibility of adapting to individual customer needs. Just submit an e-mail inquiry.

NOTE! Lengths from 600mm shipped only by courier!

Product code: 1CU-KR15X15X1