Liquid level sensor, float, double, ss, 300mm

DOUBLE FLOAT LIQUID LEVEL SENSOR STAINLESS STEEL

.

Length 300mm

.

The sensor has 2 floats with magnets and 2 independent reed switches in the body.

The sensor has 4 wires:

- two black ones are the lower float output

- two red ones are the upper float output

Both outputs are shorted in the lower position.

.

The operation is very simple: when the liquid level is below the floats, both floats are in the lower position, i.e. the outputs are shorted, the water level rising first by the force of buoyancy lifts the lower float (output no. 1 is opened) and then if the liquid level continues to rise, the second float is lifted and the second input is opened.

.

If we need the opposite action, i.e. shorting the output in the upper float position, just remove the protection (circuit breaker) and simply reverse the float on the guide pin.

.

You can also mount the sensor in reverse (rotate 180 degrees) then the floats work in reverse, i.e. in the lower position they are open.

.

Table of approximate dimensions in mm:

Technical data:

- maximum operating voltage 50V DC/AC

- maximum operating current 0.2A

- stem material SUS304 steel

- operating temperature -10 to +80 degrees C

- maximum switched power 10W

- maximum liquid pressure 0.7Mpa

- cable length about 40cm

.

Of course, you can use the sensor to control devices for higher voltages, e.g. 230VAC or 400VAC using an external contactor. Brand new product.

.

GALLERY:

The product is brand new.