rf switch 433mhz 4 channel remote control switch relay receiver module and key

433MHZ 4 Channel Wireless Remote Control Switch Receiver i

Description:

Working voltage: DC 7 - 24V (input) VCC: Connect the positive pole of the power supply, GND: Connect the negative pole of the power supply, 85-265V, to the ignition line, N connect to the zero line

Working current: about 260mA (relay pull state)

Static working current: 10mA (relay release state)

Receiver size: about 115 x 90 x 40mm (with housing, housing with screw hole)

Module type: 433MHz learning wireless access module

Receiving distance: 15 to 100 meters (can through the wall)

Working mode: self-locking, jog, interlock (3 kinds of working modules)

Working instructions: (power indicator), D6 (relay switch indicator), D2 (learning indicator)

Output mode: When the output is passive output, the module is mainly used as a mechanical switch and a contact switch. OUT1-OUT4 as a 4-channel output

Scope

Applications: water pump, light strip, lamp, household appliances, machinery

and equipment, mechanical switch, shutter curtain, etc.

Specification:

Learning method:

A. After power on, press the learning button switch 1, immediately release, immediately press and hold the switch 1 (faster speed), the learning indicator light flashes once, and then release the switch button 1, press and hold the 'A' button of the remote control to learn, the learning indicator flashes 2 times, indicating that the 'A' button of the remote control has been successfully learned,

B. The second, third, fourth channels correspond to the buttons of the switch 2, switch 3 and switch 4, they can be operated in the same way as above.

Clear method: in the power off state, press and hold the switch1 button, and then turn on the power. The learning indicator flashes 5 times, and then release the button to indicate that the module has been successfully cleared. The second, third and fourth channels correspond to the switch2, switch3 and switch4 buttons. It works in the same way as above.

Self-locking, jog and interlock function conversion operation method (switch 1-switch 4 corresponds to channel 1-4)

Jog: In the state of press and hold to press the power, the learning indicator flashes 2 times, release the key, this time is set as the jog output.

Self-locking: In the state of press and hold to turn on. The learning indicator flashes 3 times, release the button and set it as the self-locking output.

Interlock: In the state of press and hold the learning button to turn on. The learning indicator flashes 4 times, release the button and set it as the interlock output.

(The 4 channels of this module are set independently, and the self-locking, jog and each channel are set independently and do not interfere with each other, the key corresponds to the channel)

Package includes:

1 piece wireless remote control switch

1 piece 4 key remote control

Note:

Color may be slightly different due to different monitor.

The above size is measured by hand, please allow a little difference. Thank you!