Channel 4 Key Wireless Remote Switch RF 433m Control Transmitter Receiver

CH 220V Relay 4 Button 433M Remote Control Switch Wide Voltage Module

Description:

Applicable to lamps, pumps, household appliances, machinery, etc.

Wide power supply voltage AC85~265V or DC7-28V.

The module is a little movable, self-locking, interlocking three kinds of working modes, and the four modes can work independently without disturbing each other, at the same time, the module can be manually controlled or wireless remote control.

You can also refer to the 433M wireless remote control commonly used on the market. (eg: 2260 2262 2264 EV1527, etc.)

Wide application range of products, reliable quality.

Specification :

Material: FR4 glass fiber board

Detailed product size: approx. 115 x 90 x 40mm/4.53 x 3.54 x 1.57in

Working voltage: DC7-28V (input) VCC: connected to the positive pole of the power supply GND: connected to the negative pole of the power supply or AC85-265V L to connect the live line, N connects the neutral line

Working current: about 260mA (relay pull-in state)

Static working current: about 10mA (relay release state)

Module type: 4-channel 433M learning wireless control switch (4 channels can learn independently without disturbing each other)

Receiving distance: between 50-500 meters (passing through the wall)

Working mode: three kinds of working modules: self-locking, jog and interlocking (four-way each can be independently set as self-locking, interlocking and jog)

Working instructions: D1 (power indicator), D3-D6 (relay switch indicator), D2 (learning indicator)

Output mode: the output is passive output, the output is uncharged, mainly used as a contact switch, OUT1-OUT4 is 4-channel output

Jog: in the off state, press and hold the learning key to press the power, the learning indicator flashes 2 times, release the key, this time is set as jog output.

Self-locking: in the off state, press and hold the learning button, and then turn on the power. The learning indicator flashes 3 times, release the button, and set it as self-locking output.

Interlock: in the off state, press and hold the learning button to turn on. The learning indicator flashes 4 times, release the button, and set it as interlocking output.

(4 channels of this module are set independently, and the self-locking, inching and interlocking of each channel are set independently and do not interfere with each other, one button corresponds to one channel)

Package includes:

1 piece 433MHz 4-channel wireless remote control switch

1 piece 4 button 433M thin remote control