Liquid level sensor double float steel 125

DOUBLE FLOAT LIQUID LEVEL SENSOR STAINLESS STEEL

.

Size 125mm

.

The sensor has 2 floats with magnets and 2 independent reed switches in the body.

The sensor has 4 wires:

- two black ones are the lower float output

- two red ones are the upper float output

Both outputs are shorted in the lower position.

.

The operation is very simple: when the liquid level is below the floats, both floats are in the lower position, i.e. the outputs are shorted, the water level rising first by the force of buoyancy lifts the lower float (output no. 1 is opened) and then if the liquid level continues to rise, the second float is lifted and the second input is opened.

.

If we need the opposite action, i.e. shorting the output in the upper float position, just remove the protection (circuit breaker) and simply turn the float on the guide pin.

.

You can also mount the sensor in reverse (rotate 180 degrees) then the floats work in reverse, i.e. in the lower position they are open.

.

Approximate dimensions:

Technical data:

- maximum operating voltage 50V DC/AC

- maximum operating current 0.3A

- material SUS304 steel

- operating temperature -10 to +100 degrees C

- maximum switched power 10W

- maximum liquid pressure 0.7Mpa

- cable length 30cm

.

Of course, you can use the sensor to control devices for higher voltages, e.g. 230VAC or 400VAC using an external contactor.

GALLERY:

The product is brand new.