Wireless remote control switch

Today, we would like to offer you, dear customers:

DieseRC Universal Wireless Remote Control Switch RC 2204 AC 4CH 433Mhz with 2 Transmitters

Brand: DieseRC

Model: 2204

Special Features: Universal

Communication Technology: Radio Frequency

Channels: 4

Receiver Operating Voltage: AC 85V ~ 250V

Input / Output Voltage: 1 ~ 250V

Maximum Current: 10A

RF Frequency: 433 MHz

Coding Support: 1527 Learning Code, 2262 Fixed Code

Reception Sensitivity: >97 dbm

RF Working Mode: Superheterodyne ASK Wireless Reception

Operating Temperature: -30 ~ + 80

Reception Range: Open Space Over 50m

Quiescent Current: <5 MA

Strong 433MHz RF Signal: DieseRC RF wireless remote control switch relay, which uses 433MHz radio frequency technology, has a strong signal that can pass through walls, floors and doors, and the EV1527 chip makes the system more secure. With the transmitter, you can control any device connected to the relay receiver from anywhere.

Easy to Use: Extremely easy to set up and reset, there are 3 working modes (momentary / toggle / lock mode). The working mode can be adjusted according to your needs. Receiver with 4 relays, which can be controlled independently, for example, you can use two relays to control your garage door / motor, and the other two to control your lights.

Wide Application: Products can be used in homes, farms, factories, offices, laboratories, supermarkets, etc. The applications of wireless remote control range from simple home remote controls to automation such as garage doors, electric curtains, motors, alarm systems, lighting, ventilation equipment, electric doors, DIY remote control socket, etc.

Momentary mode:

1. Press and hold one button, relay turn on,

2. Release the button, relay turns off.

Switch mode:

1. Press the "A" button, relay "1" turns on,

2. Press the "A" button again, this relay "1" turns off

Latch/lock mode:

1. Press the "A" button, relay "1" turns on,

2. Press the "B" button, relay "2" turns on, at the same time relay "1" turns off.

Setup: Press the learning button 1 times (on the receiver), wait 3 seconds, then press the 'A' button on the remote control to finish.

Set includes:

1x RF Relay Receiver

2x Remote Control

DN

750828381330

New / outlet product, damaged packaging or replacement packaging possible.