Relay dc 12v 10a 1 channel wireless

Channel Wireless RF Remote Control Switch Transmitter + Receiver 03 Button AB

Description:

DC 12v 10A Relay 1 Channel Wireless RF Remote Control Switch Transmitter + Receiver, 433mhz, for Common Fixed Code and Learning

There are 6 types transmitter + receiver in this list, they are different shape, the same function Turn on or off the receiver by transmitter(remote control) Transmitter(remote control) two button functions: A means ON, B means OFF, one button: one press means ON, press again means OFF

New fast diode, more stable and durable, you can just connect the line(see the picture) and start

For home automation/lighting, garage door opener, motor control, access control, alarm systems, other home security projects etc

Strong signal passes through walls or doors, controls the receiver from anywhere within a certain distance

Specification:

Small and sturdy, durable.

Material: Thicken flame retardant ABS

Can store 16 different codings at most.

Wiring: Fixed wiring posts (see picture).

Receiver coding type: learning code, remote control coding type: fixed code.

Remote control size: approx. 6x3x1cm/2.4x1.2x0.4in, receiver size: approx. 4.5x3.5x2cm/1.8x1.4x0.8in

Output: switch output, normally open, common, normally closed end.

Working voltage: DC12V 10A

Frequency: 433MHZ

Remote control receiving distance: 50-80 meters

Receiving sensitivity: >-110dbm

Working temperature: -20 to 80 degrees Celsius

Working mode description:

1.Inching: Learning the remote control coding method: Press the learning button of the receiver board once, until the indicator light flashes once, then press the remote control button. Learning is complete.

2.Self-locking: Press the learning button twice, the indicator light is normally on, immediately press the key on the remote control you want to match. The indicator light flashes 3 times in succession, means learning successfully.

3. Internal locking: Press the learning button 3 times in succession, after the red light is on normally, immediately press the first button (A), and then press the second button (B). The indicator light flashes 3 times in succession, means learning successfully.