Bistable relay 2 channels 8a 230v bis 416

Product description Dual-channel

Power supply: 165÷265 V AC

Max load: 2x8 A

Connection: screw terminals

Electronic bistable relay enables switching on lighting or another device from several different points using control buttons connected in parallel.

Operation

The receiver is switched on by a current pulse caused by pressing any momentary (bell) button connected to the relay. After the next pulse, the receiver will be switched off.

The relay has two independently controlled channels. Control is carried out using two separate signal inputs. The pulse at input S1 controls output R1. The pair of input S2 and output R2 works similarly.

The relay does not have a 'memory' of the contact position, i.e. in the event of a power failure and its subsequent return, the relay contact will be set to the off state. This prevents controlled receivers from switching on automatically without supervision after a long-term power failure.

Illuminated buttons

If too many illuminated buttons are connected, the lighting may switch on automatically or switch on permanently

Maximum load current

The contact current given in the technical data is the maximum value and may be subject to restrictions - more information. If the information presented indicates that the relay in the device is insufficient, it is recommended to use an external switching element (e.g. contactor) adapted to switch large surge currents.

State memory

The relay does not have a 'memory' of the contact position. This means that after switching on the power supply, the relay contact will always remain in the off position.

Supply voltage: 165÷265 V AC

Local control: YES

Maximum load current AC-1: 2 x 8 A

Executive element: relay

Contact configuration: 2 × NO

Contact separation: NO

Resistance to surge currents - cooperation with LED: NO

Number of channels: 2

Functionality: on/off

Delay in operation: 0.1 ÷ 0.2 s

Control pulse current: less than 5 mA

Cooperation with illuminated buttons: YES

Status memory after power failure: NO

Timed on function: NO

Dedicated central control inputs: NO

Radio control: NO

Connection: 2.5 mm² screw terminals

Tightening torque: 0.4 Nm

Power consumption: 0.7 W

Operating temperature: -25 ÷ 50 °C

Dimensions: Ø54 (48×43 mm), height: 20 mm

Mounting: in a Ø60 flush-mounted box

Protection class: IP20