Thermostat temperature regulator fach cieszyn rd 2

THERMOSTAT TEMPERATURE CONTROLLER FACH CIESZYN RD-2Manufacturer: FACH SA Cieszyn

Product code: 0025-1732

Purpose: RD type temperature controllers are two-position controllers in the electrical output. They are designed to control the operation of heaters in electric heating devices. The working contact is disconnected when the temperature rises above the set temperature, and it is reconnected when the temperature drops by the hysteresis zone value.

Technical data of the RD-2 thermostat Temperature regulation range: from 50°C to 200°C

Application: temperature regulation.

Knob stem diameter: 6 mm

Connection: with pins

Sensor length: about 100 cm

Condition: new regulator - unused (storage shelf)

TYPE RDPurpose:

RD type temperature regulators are two-position regulators in the electrical output. They are designed to control the operation of heaters in electric heating devices. The working contact is disconnected when the temperature rises above the set temperature, and it is reconnected when the temperature drops by the hysteresis zone value.

Construction:

RD temperature regulators are resistant to ambient temperatures from -20°C to 55°C. They are designed for built-in devices of class 0I and I. Two 6.3 inserts according to PN-76/E-06300/09 are used to connect electrical wires. The switch-off temperature is set using an adjustable shaft, while turning to the right sets a higher temperature. RD type temperature controllers are distance controllers.

Controller weight 0.12 kg.

Mounting:

The controllers are mounted using two M4 screws (not included). The position of the controllers can be any. Good contact between the sensor and the regulated environment must be ensured. The marked mounting hole should be used to attach the protective conductor.

NR