Heat shrink tube red 4 5mm 1m

Heat shrink tube diameter 4.5 mm - 1 m red Heat shrink tubes, pipes, sleeves (thermoshrinks) are used to insulate electrical elements from touching or short-circuiting, protect elongated objects from mechanical damage, moisture penetration, corrosion. They can also be used for decorative purposes. After sliding a tube of an appropriately selected diameter onto the protected object and heating it with a heat gun or gas burner to a temperature above 115-120 degrees Celsius, the tube shrinks, creating a tight insulating layer.

CB -HFT type heat shrink tubes - flexible, halogen-free, resistant to ignition - up to 125 ° C, are widely used in electronics and electrical engineering, wherever a halogen-free environment is required

Shrinkage temperature: 90 ° C

Radial shrinkage: greater than or equal to 50%

Change in length less than +/- 5%

Tensile force: over 1.4 MPa

Flammability: VW-1

Concentricity: greater than 70%

Elongation at break: greater than 200%

Certifications: UL, CUL, F-Sony Green Partner