Stickers Tucano tractor Claas combine 50cm

STICKERS: TUCANO dimensions: up to 50 cm (longer side)

Price applies to: 2 pieces (for the right and left side)

Stickers are cut from self-adhesive foil from renowned manufacturers (resistant to weather conditions - frost, sun, mud, rain)

Cut-out stickers are plotter technique (cutting along the outline) according to the individual customer order (pattern, size, color, etc.)

Stickers can be covered with clear, non-solvent varnish

All stickers have a transport foil, so they are easy to stick

The sticker is the black part of the graphics , any white spaces in the graphics below are the background, i.e. the surface on which we stick the graphics, after gluing, only the elements cut out from the foil will remain, without the background

TUCANO CLAAS TRACTOR TRACTOR COMBINE

The actual colors may differ slightly from the colors in the photo

Stickers suitable for machines agricultural type: tractor tractor combine harvester CLAAS bison

APPLICATION INSTRUCTIONS:

Clean and degrease (e.g. with extraction gasoline) the surface on which the sticker will be glued.

Press the sticker onto the transport foil with a squeegee, making several sliding movements back and forth.

Gently Peel off the backing paper from the transport foil with the sticker. Do it from as wide an angle as possible. If the sticker does not come off the paper, press it against the transfer foil again and try again. To avoid air bubbles, stick the sticker starting from one side. Be careful not to stick the entire sticker at once. Then gradually press the transfer foil with a squeegee until it reaches the other side of the sticker. Press the entire sticker again with a squeegee. Peel off the transport foil slowly and carefully at a large angle. Make sure that all elements are glued well and that the transport foil does not come off. If this happens, stick this part back on and press firmly.

Recommended gluing temperature above +10 °C. The adhesive achieves 100% adhesion 24 hours after application. Do not wash the surface for 48 hours after applying the sticker