John Deere tractor stickers 85 cm

STICKERS: JOHN DEER Dimensions: 85 cm

The price is for: 2 pieces (for the right and left side)

The stickers are cut from self-adhesive foil from renowned manufacturers (resistant to weather conditions - frost, sun, mud, rain)

The stickers are cut using a plotter technique (cutting after outline) at the individual customer's request (pattern, size, color, etc.)

Stickers can be covered with a clear, non-solvent varnish

All stickers have a transport foil so they are easy to stick

The sticker is the black part of the graphic, any white spaces on the graphics below are the background, i.e. the surface on which we stick the graphics, after sticking only the elements cut out of the foil will remain, without the background

After purchasing, you must provide:

Pattern number

Color of the stickers

If you do not provide a color or size pattern after purchase, you will receive the pattern and color from the thumbnail of the maximum size from the auction

The actual colors may differ slightly from the colors in the photo

Stickers suitable for agricultural machines such as: tractor, combine harvester, bison brand JOHN DEERE

APPLICATION INSTRUCTIONS:

Clean and degrease (e.g. extraction naphtha) the surface on which the sticker will be glued.

Press the sticker to the transport foil with a squeegee, making several sliding movements back and forth.

Gently peel off the backing paper from the transport foil with the sticker. Do it from as wide an angle as possible. If the sticker does not come off the paper, press it against the transfer foil again and try again. To avoid air bubbles, stick the sticker starting from one side. Be careful not to stick the entire sticker at once. Then gradually press the transfer foil with a squeegee until it reaches the other side of the sticker. Press the entire sticker again with a squeegee. Peel off the transport foil slowly and carefully at a large angle. Make sure that all elements are glued well and that the transport foil does not come off. If this happens, stick this part back on and press firmly.

Recommended gluing temperature above +10 °C. The adhesive achieves 100% adhesion 24 hours after application. Do not wash the surface for 48 hours after applying the sticker